Instruction Manual

vinyl records, it will stop when it does not come to the end, or it will not stop when it comes to
the end when AUTO STOP is ON.
6.Turn the VOLUME CONTROL KNOB to adjust the volume.
Bluetooth Mode
1. Press up the MODE button to BT mode. The LED light indicator becomes blue with flashing.
2. Turn on your Bluetooth function on your mobile phone or tablet PC and then search the
turntable player with its name LPSC-025. After pairing and connection, the LED light indicator
becomes blue without flashing, and you can play your music of your mobile phone or tablet PC
on this turntable player.
3. Turn the VOLUME CONTROL KNOB to adjust the volume.
Remark: the mobile phone or tablet PC's volume level also impact the overall volume; please
adjust that as well to have a satisfying sound.
Drive Belt Assembly
The belt and turntable platter have been installed properly at factory, but the belt may be
loose during transportation. If so, the following procedures will be taken for belt installation
by yourself:
A. Remove the felt mat from the turntable platter and the E ring from the turntable shaft,
then release the turntable platter from the shaft.
B. Put the drive belt on the inner rim of the turntable platter and put back the platter through the
shaft.
C. Hold the belt with your fingers and place the belt onto the motor pulley as shown in below
drawing.
D. Clip the E ring on the shaft and place the felt mat onto the turntable platter.
Caution
1. Make sure that the drive belt is not twisted or distorted.
2. Avoid oil. Oil splashes will make the belt slippery