User's Manual

Page: 28
Soapy Care Ltd.
Daily cleaning Procedure:
1) Place a small amount of the cleaning agent ( 70% alcohol-based liquid for cleaning) on a rag and clean
the inner space of the device and the external panel.
Image 3: Cleaning the inner space
2) Wipe out the cleaning agent with a dry rag or paper towel.
3) Verify that the soap dispense hole at the sprinkler is open. If it is not, use a silicone tool for cleaning.
Image 4: Cleaning the sprinkler soap hole
Image 5: Cleaning the side sensors
Do not clean the sensors with the cleaning agent or direct water current.
It is recommended to dry all surfaces with clean tissue paper or similar to prevent the formation of a
favorable bacterial environment.