User's Manual

Page: 21
Soapy Care Ltd.
5.7 Electrical connection
Scheme G: Electrical connection
1) Connect the product to a grounded outlet protected by a fuse defined by regulatory rules.
Our company shall not be liable for any damages that will arise when the product is used without
grounding in accordance with the local regulations.
2) Connect the device to a proper outlet and turn the power button ON (-).
Image 1: Power button ON (-)
• Connection must comply with local country regulations.
• Power cable plug must be within easy reach after installation.
• The voltage specified in the "
Technical specifications" section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
The ECO device must be grounded – if the appliance is improperly grounded, the result could be electric
shock. Please ensure that the ECO device is set up, so access to the power outlet and plug is unobstructed.
To provide additional protection from the risk of shock, the ECO-02 device MUST be connected to a
ground fault circuit interrupter (GFCI) outlet at all times.
Damaged power cables must be replaced by the Authorized Service Agents.