User's Manual

Page: 15
Soapy Care Ltd.
5.1 Package opening
Scheme A: Package opening
1) Open the cardboard box by using scissors or an office knife. Cut off the plastic bag and yellow stripes. Take
the cover cardboard part off the ECO-02 device by pulling the upper side up.
2) Make sure the accessory kit is present in the packaging and contains all the accessories listed. (See
“
Accessory Kit”, par. 2.2.2).
2) Take the protective plastic bag off the ECO-02 device and prepare the place of the installation by reading
the next paragraph.
5.2 Location of installation
• ECO-02 devices must be placed on a wall with provided mounting bracket or countertop.
• Total weight of the device without packaging approx. 16 kg.
• Do not operate the system at places where the temperature may fall below 5ºC and raise the temperature of
50ºC.