User's Manual

Page: 14
Soapy Care Ltd.
Values stated on the product labels or in the documentation accompanying it are obtained in
laboratory conditions in accordance with the relevant standards. Depending on the operational and
environmental conditions of the product, these values may vary.
5 Installation
Refer to the Authorized Service Agent for the installation of the product. To make the product ready for use,
review the information in the user manual, and make sure that the electricity, tap water supply and water
drainage systems are appropriate before calling the Authorized Service Agent (See “Site preparation”
document). If they are not, call a qualified technician and plumber to have any necessary arrangements
carried out.
Preparation of the location and also electrical, tap water, Wi-Fi network, and wastewater installations at
the place of installation are under customer's responsibility.
Installation and electrical connections of the product must be carried out by the Authorized Service
Agent. The manufacturer shall not be held liable for damages that may arise from procedures carried out by
unauthorized persons.
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched
or crushed after installation or cleaning procedures.
Some water might have remained in the product due to the quality control processes in the production.