Datasheet

SONARANGE UPX 05.14 e
This Information corresponds to the current state of knowledge. SNT reserves the right to make technical changes. Do not use these products in any application
where failure of the product could result in personal injury. Liability for consequential damage resulting from the use of SNT products is excluded.
SNT Sensortechnik AG, Hammerstrasse 6, CH-8180 Bülach, Switzerland, Phone [phone], Fax [phone], [e-mail] 4/4
www.sntag.ch
Standard versions
Type Detection range Description Scheme
UPX 150 PVPS 24 150mm PNP NO, 2m integrated cable A
UPX 150 PVPS 24 C 150mm PNP NO, 3-Pin connector A
UPX 500 PVPS 24 500mm PNP NO, 2m integrated cable A
UPX 500 PVPS 24 Y 500mm PNP NO, synchronisation input, 4-Pin connector B
UPX 500 PVPS 24 C 500mm PNP NO, 3-Pin connector A
Option NPN instead of PNP
Option NC instead of NO
Basically all possible versions are available according to the following key:
Detection range: XXX: 150 = 170mm, XXX: 500 = 500mm
Product key
UPX XXX PV   24  
Accessories (see also data sheet ‚ACC’)
Cables 4-pin with M8 screw connector, PUR:
with straight connector: l=2m Type KAB 2K4VGPUR
l=5m Type KAB 5K4VGPUR
with 90° connector: l=2m Type KAB 2K4VWPUR
l=5m Type KAB 5K4VWPUR
Cables 3-pin with M8 screw connector, PUR:
with straight connector: l=2m Type KAB 2K3VGPUR
l=5m Type KAB 5K3VGPUR
with 90° connector: l=2m Type KAB 2K3VWPUR
l=5m Type KAB 5K3VWPUR
Some typical ultrasound applications
Level measurement
• Measuring level in small containers
• Water gauge measurement
• Monitoring liquid levels in bottling plants
• Checking for tailbacks on conveyor belts
• Monitoring contents of granulate hoppers
Process control
• Controlling belt tension or sag
• Sensing and signaling valve positions
• Measuring roll diameter on reeling machines
• Monitoring the height of stacks (charges, storehouse)
• Detecting material feed
• Detecting the feed of strip stock to blanking machines
Counting / Detection
• Counting onlookers at freestanding sales displays
• Access supervision at rotating doors, counters etc.
• Door automation
• Detecting transparent objects, foils, flat glass, bottles
etc.
• Sensing objects in robot grippers
• Recognizing full or empty pallets
• Count and detect objects with 'difficult' surface
• Detect wrong parts on conveyors
• Collision protection on vehicles
Scanning of dimensions
• Determining the dimensions of packages
• Sensing the height of plants in automated green houses
synchronisation input (4-pin connector) Y
connector
integr. Cable
C
-
binary output NO
binary output NC
S
O
binary output PNP
binary output NPN
P
N