Datasheet

SONARANGE UPR-A 04.17 e
This Information corresponds to the current state of knowledge. SNT reserves the right to make technical changes. Do not use these products in any application
where failure of the product could result in personal injury. Liability for consequential damage resulting from the use of SNT products is excluded.
SNT Sensortechnik AG, Hammerstrasse 6, CH-8180 Bülach, Switzerland, Phone [phone], Fax [phone], [e-mail] 5/6
www.sntag.ch
Dimensions Accessories (see also data sheet ‚ACC’)
PUR cable 3-wire (pin 1, 3, 4) with M12 connector:
l=2m Type KAB 2L3VGPUR
PUR cable 4-wire with M12 connector:
l=2m Type KAB 2L4VGPUR
l=5m Type KAB 5L4VGPUR
l=10m Type KAB 10L4VGPUR
Teach-In box: see separate data sheet
Parts included
• Sensor
• 2 of each M18 nuts, washers and rubber sleeves for
mounting
• ATEX version: soldering eyelet
• Chemical resistant version: 2 O-rings
Teach Table
Time
Connect teach
wire with:
LED
blinking
Version with binary output
UPR-A 1500 TVPA 24 C(W)
Version with analogue output
UPR-A 1500 TOR 24 C(W)AI
1...5s
+U
B
(typ. +24VDC)
yellow
slowly
NO: far window point or switching point
NC: near window point
10V or 20mA
1...5s
-U
B
(0VDC)
yellow
slowly
NO: near window point
NC: far window point or switching point
0V or 4mA
5...10s
+U
B
(typ. +24VDC)
yellow
fast
retroreflective barrier NO
-
10...15s
+U
B
(typ. +24VDC)
red
fast
retroreflective barrier NC
-
5...10s
-U
B
(0VDC)
yellow
small detection cone
small detection cone
10...15s
-U
B
(0VDC)
yellow/red
medium detection cone
medium detection cone
15...20s
-U
B
(0VDC)
red
large detection cone
large detection cone
>20s
-U
B
(0VDC)
no LED
factory reset
factory reset
The distance value is teached which was present at the end of the teach process.
54
90
105
M18x1
M12x1
axial sensing direction
M18x1
M12x1
72
108
123
radial sensing direction
M12x1
95
Ø22
M18x1
12
109
59
ATEX Version