Product Manual

SnowWolf Pro Series Snow Plow
800-905-2265
2
Forward
Congratulations on the purchase of your SnowWolf, the finest snow plow on the market today!
SnowWolf Pro Series Snow Plows are designed by people with years of experience in the cold
Minnesota winters. You can be sure that the quality and innovation of the Pro Series is our first priority.
Getting to know your new snow plow should be the first step in learning its features and limitations. This
manual is designed to assist you in the operation and maintenance of your SnowWolf.
Document History
The table below lists all revisions of the Pro Series Operation and Maintenance Manual.
Document Revision Summary of Changes Publication Date
First publication First revision
10/21/08
Corporate Headquarters
WolfGroup International
14311 Ewing Avenue
Burnsville, MN 55306
800-905-2265 toll free
952-224-4430 local
952-224-4444 fax
[e-mail]
www.wolfgroupintl.com
© 2008 – WolfGroup International. All Rights Reserved. 10/2008
All other brands, products, or service names are trademarks or service marks of their respective owners, and are
used to identify products or services of their companies or organizations.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied,
concerning any equipment, equipment feature, or service offered or to be offered by WolfGroup International.
WolfGroup International reserves the right to make changes to this document at any time, without notice, and
assumes no responsibility for its use. This informational document describes features that may not be currently
available. Contact a WolfGroup International sales office for information on features and product availability.
SnowWolf Pro Series Snow Plow
800-905-2265
11
Snow Plow Specifications
Table 2 – Specifications
Pro Series Available Accessories
Description Pro-5.0 Pro-6.0 Pro-7.0 Pro-8.0
Blade Width 5’ 6’ 7’ 8’
Blade Width at Full Angle 50” 59” 68.8” 78.6”
Blade Height 30” 30” 30” 30”
Weight 479# 511# 543# 575#
Gauge of Moldboard 12 Ga 12 Ga 12 Ga 12 Ga
Trip Springs 2 2 2 2
Wear Shoes Yes Yes Yes Yes
Cutting Edge (1085 High Carbon) 3/8” x 6” 3/8” x 6” 3/8” x 6” 3/8” x 6”
Angle Rams 1 ½” x 10 1 ½” x 10 1 ½” x 10 1 ½” x 10
Vertical Ribs 6 6 6 6
Moldboard Radius 15” 15” 15” 15”
Trip Edge Yes Yes Yes Yes
Universal Skid Steer Mount Std. Std. Std. Std.