User Manual

6 © TrynEx International 2013 (REV B) F50729A
Operating Instructions
Attaching to Vehicle/Adjustable Material Bafes
ADJUSTABLE MATERIAL BAFFLES
ATTACHING TO VEHICLE
If you are using a TPR-020 insert the hitch into your receiver. Lock with Hitch Pin and Hair Pin. Plug Spreader Harness into Vehicle Harness
and you are ready to begin spreading.
If you are using the UBM-175 mount, follow the UBM-175 Installation Instructions, Connect the Spreader Harness to the Vehicle Harness and
you are ready to begin spreading.
To attach to your tractor’s three-point hitch, simply back up to the spreader frame (requires F51196 on SD-600) and attach the hitch to the
spreader. Plug in and begin spreading.
The Drop Pro is equipped with adjustable material bafes inside the hopper. These bafes restrict the ow of salt to the Distribution Shaft.
Leave these bafes at the factory setting until you have run some material through the spreader at different speeds. The Bafes may need
adjusted for different materials, or if the Distribution Shaft is getting too much material, due to an easily owing material.
Use an 1/2” wrench for the bolts.