Manual

Gate Assembly Kit Parts Breakdown

Model #GAK-020

for SP-575 and SP-1075

Key Part No. Description Qty.

D 4289 1/4'' Lock Nut

D 6138 5/16'' Lock Nut

D 6140 5/16'' Set Screw

D 6185 Agitation Auger

D 6365 SS Gate Body

D 6366 SS Gate Slide

bonK etaG 2036 D

D 6367 SS Throat Mount

elbaC '01 4036 D

D 6305 Cable Fitting Assy

D 6308 5/16'' - 18 Special Bolt

D 6309 Knob Square Nut

D 6311 1/4 - 20 x 1/2'' Hex Bolt

D 6368 SS Gate Stop Indicator

D 6351 Cable Mounting Bracket

GAK-020 Assembly

Bottom View

GAK-020 Assembly

Top View

PAGE 1
Gate Assembly Kit Parts Breakdown Model #GAK-020 for SP-575 and SP-1075 GAK-020 Assembly Top View Key Part No. D 4289 D 6138 D 6140 D 6185 D 6365 D 6366 D 6302 D 6367 D 6304 D 6305 D 6308 D 6309 D 6311 D 6368 D 6351 Description 1/4'' Lock Nut 5/16'' Lock Nut 5/16'' Set Screw Agitation Auger SS Gate Body SS Gate Slide Gate Knob SS Throat Mount 10' Cable Cable Fitting Assy 5/16'' - 18 Special Bolt Knob Square Nut 1/4 - 20 x 1/2'' Hex Bolt SS Gate Stop Indicator Cable Mounting Bracket Qty.
PAGE 2
Gate Assembly Kit Instructions Model # GAK-020 INSTALLATION INSTRUCTIONS Step 1: Remove hopper by taking out the two 5/16'' stainless steel bolts located inside the hopper. Step 2: Remove throat clamp using a 9/16'' wrench or socket. Step 3: Remove auger using allen key. NOTE: Do not re-install when using gate assembly kit. Step 4: (Optional) Next determine how long your cable should be. Once you have determined the length, pull control wire back 3” from your cut off point.