Use and Care Manual

SNOWPLOW PART LIST
Before you be
g
in, please verify that all of the parts below have been included with
y
our
p
low. Your
p
low is
p
acka
g
ed in two boxes.
Item Quantity Description Part Numbe
r
1 1 Blade **
82" Scraper for 82" Blade 5-B
2 1
84" Scraper for 84" Blade 00227-B
88" Scraper for 88" Blade 00230-B
3 1 Lower A-Frame 00420-B
4 1 Upper A-Frame 00430-B
5 1 5/8 -11 Lock Nut Center 2-Way 73095
6 1 5/8 -11 x 2" Hex Bolt 73015
7 1 5/8" Flat Was her 73080
8 1 Pivot Bolt Sleeve 79575
9 2 Fram e Pin 41338-B
10 1 Winch frame - Driver side 00409-B
11 1 Winch frame - Passenger side 00408-B
12 1 Winch Mount Plate - Black 00496-B
13 2 12" Snowplow Spring 00470-B
Eyebolt - 4-1/2" (82" Blade) 79013
14 2
Eyebolt - 9-1/2" (84" Blade) 79015
Eyebolt - 12" (88" Blade) 78195
15 1 Release Handle 00475-B
16 1 Release Rod 00480-B
17 1 Complete W inch w ith Strap and Controls 00390 *
17a Winch With Strap 00385
17b Winch Controls 00395
17c 2,000 lb Winch Strap 79089
17d Winch Switch and Control Box 00405
17e 2' Winch Connecto
r
00403
18 1 35A Circuit Breake
r
00435
19 1 Circuit Breaker Bracket 00436
20 2 14" Cable Ties 97362
21 1 U Bolt for Winch Strap 79040
22 2 Snowplow Marke
r
79099
23 1 Mount As s is t plow s tand 00499-B
24 1 Safety Hook 79075-B
25 3 5/16" x 2 1/2" Hitch Pin 79020
26 26 3/8 -16 Lock Nut Center 2-Way 71595
27 1 3/8 -16 x 1 1/4" Hex Bolt 71508
28 1 3/8 -16 x 1 1/2" Hex Bolt 71510
29 3 3/8 -16 x 2" Hex Bolt 71515
30 4 5/16 -18 x 1" Hex Bolt 71205
31 4 5/16 -18 Lock Nut Center 2-Way 71295
32 4 1/2 -13 Lock Nut Center 2-Way 72595
33 4 1/2" Flat Was her 72580
34 2 1/2 -13 x 2" Hex Bolt 72515
35 15 3/8 -16 x 1" Carriage Bolt. 75005
36 3 Clevis Pin 1/2" x 2" 79025
37 3 Cotter Pin 1/8" x 1" 79030
38 1 Cross Member 5XM5-B
NOTE: 00390 Com plete Winch with Strap and Control Kit will include item s "a" through "e".
Individual components may not be available to order as separate items.
Contact customer service at 1.800.337.2327 to inquire about the availability of particular parts.
* SnowBear Limited reserves the right to change products or part numbers without prior notif ication,
and under no obligation to incorporate such changes into previously manufactured products *