Instructions / Assembly

Opening the Battery Compartment

1. Make sure the unit is turned o and switch is in center position.

2. Locate battery compartment on the back panel of illum-n-

broom. Loosen and remove battery cover using a coin or slotted

screwdriver.

3. Insert two AAA batteries as indicated in the battery compartment,

ensuring proper alignment.

4. Close battery compartment door and tighten to ensure watertight

seal. Do not over-tighten.

NOTE: Slide on/o switch right to activate lights. Slide switch left to

activate safety blinkers.

4-IN-1 ILLUM-N-BROOM

Model SJBLZD-LED