Operator`s manual

Unpacking

Carton Contents:

• Pressure washer unit

• Handle

• Manual

• Trigger gun

• Spray wand

• Quick connect 0º, 15º, 25º, 40º and soap nozzles

• Removable detergent tanks (2)

• 4 long screws

• 2 small screws

• Spray wand protector

• Trigger gun holder

• Hose holder

• Needle clean out tool

• High pressure hose

• Garden hose adaptor (female coupler) with two sealing rings

1. Carefully remove the contents from the shipping carton.

Make sure that all items listed in the carton contents are

included.

2. Inspect the product carefully to make sure no breakage

or damage occurred during shipping. If you nd damaged

or missing parts, DO NOT return to the store. Please call

1-866-766-9563.

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new Electric Pressure

Washer.

Assembly

1. Position the washer as CLOSE as possible to the

water supply.

2. The washer must be used on a secure and stable surface

in a standing, upright position (Fig. 1).

3. Slide the trigger gun holder into position (Fig. 2).

4. Slide the handle into position and secure it with 4 long

screws (Fig. 3).

5. Insert the detergent bottles (top end rst) under the ridge

of their designated storage compartment (Figs. 4 & 5).

Then snap the bottom of the bottles into the V-shaped

grooves to secure them in place (Fig. 6).

Fig. 1

Fig. 2

Fig. 3

Fig. 4