Operator`s manual

8. Connect the high pressure hose to the trigger gun (Fig. 11).

9. Connect the high pressure hose to the water outlet on the

washer (Fig. 12).

mWARNING! Keep hose away from sharp objects.

Bursting hoses may cause injury. Examine hoses regularly and

replace if damaged. Do not attempt to mend a damaged hose.

10. Connect the garden hose adaptor (female coupler) to

the water inlet of the pressure washer, then thread your

garden hose (male end) into the garden hose adaptor

(Fig. 13). The garden hose must have an internal diameter

of at least 13 mm (1/2 in.) and must be reinforced. The

water supply must be at least equal to the washer delivery

capacity.

NOTE: The machine is not suitable for connection to the

potable water main.

11. Attach garden hose to water supply (Fig. 14).

mWARNING! The intake water temperature must not

exceed 104ºF/40ºC. The water supply must not exceed

0.7 MPa.

mCAUTION! The washer must only be used with clean

water; use of unltered water containing corrosive chemicals

will damage the washer.

12. Push the motor switch to the OFF (0) position (Fig. 15).

High pressure hose

Trigger gun

Fig. 11

Fig. 12

(FRONT)

High pressure water outlet

High pressure hose

Fig. 13

(REAR)

Water inlet

(female coupler)

Garden hose

This end to

water inlet

Garden hose

(male end)

Fig. 14

Connect to water supply

and open the valve

completely

Garden hose

OFF

Fig. 15