Operator`s manual

Unpacking
Carton Contents:
Pressure washer unit
Handle
Manual
Trigger gun
Adjustable spray wand
Removable detergent tank
Needle clean out tool
2 long screws
2 small screws
High pressure hose
Garden hose adaptor (female coupler) with two sealing rings
1. Carefully remove the contents from the shipping carton.
Make sure that all items listed in the carton contents are
included.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you nd damaged
or missing parts, DO NOT return to the store. Please call
1-866-766-9563.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new Electric Pressure
Washer.
Assembly
1. Position the washer as CLOSE as possible to the
water supply.
2. The washer must be used on a secure and stable surface
in a standing, upright position (Fig. 1).
3. Slide the handle into position and secure it with 2 long
screws (Fig. 2).
4. Insert the detergent bottle (top end rst) under the ridge
of its designated storage compartment (Figs. 3 & 4). Then
snap the bottom of the bottle into the V-shaped groove to
secure it in place (Fig. 5).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
5