Operator's Manual
8
Using the LED light
1. Turn on the power station by pressing and hold the power
switch until the LCD screen shows the standby display
(Fig. 6).
2. Press the LED light switch to turn on the LED light. Press
it again to turn o the light (Fig. 11).
3. Hold the power station by the handle to use it as a
spotlight (Fig. 12).
Turning o the Power Station
NOTE: To avoid depleting the battery power, make sure to turn
o the power station when not in use.
1. If the AC power is turned on, switch o the AC output
switch and disconnect all devices from either side of the
station.
2. Press the power switch to turn o the power station.
Operation Tips
1. This product may become hot during charging, this is
normal.
2. Avoid storing this device near coins, jewelery, keys, and
other metal objects. An accidental electrical discharge
may cause damage.
USB-OUTPUT
USB-OUTPUT
DC-OUTPUT
INPUT
Fig. 11
LED light switch
LED light
LCD Screen (LED
light mode)
USB-OUTPUT
USB-OUTPUT
DC-OUTPUT
INPUT
Fig. 12
3. Do not place the unit near or under intense heat or re.
4. The unit is not waterproof, avoid water and other liquids.
5. Do not drop the unit. Do not place heavy objects on the
product.
6. Do not cover this product with towels, clothing during use.
7. Do not charge the power station longer than the time
required to fully charge.
Using the Wireless Charger
The top of the power station can also serve as a wireless
charger. With the power station turned on, place your device
on the wireless charging pad on the top of the power station.
The power station will start to charge the device (Fig. 13).
Maintenance
m
WARNING! Always switch the product o and
disconnect any devices plugged in before performing
inspection, maintenance, and cleaning work.
mWARNING! When servicing, use only identical
replacement parts. Use of any other parts could create a
hazard or cause product damage.
General Maintenance
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
mWARNING! Do not at any time allow brake uids,
gasoline, petroleum-based products, penetrating oils, etc to
come into contact with plastic parts. Chemicals can damage,
weaken or destroy plastic, which could result in serious
personal injury.
USB-OUTPUT
USB-OUTPUT
DC-OUTPUT
INPUT
Fig. 13