User Manual
6
3. Attach the upper and middle handle assembly to the lower
handle using the remaining knobs and bolts provided.
Tighten the knobs on each side to ensure a secure t
(Fig. 3).
4. After assembling the handle, line up the holes at the lower
end of each handle arm with the short posts that extend
out from the side plates of the mower base (Fig. 4).
5. Pull both sides of the lower handle bars over the posts
on the mower body. Press inward on the handle bars to
ensure a secure t over the posts.
Assembling and attaching
the grass catcher
1. Fit the support rod into the tube of the grass catcher
(Figs. 5 & 6).
2. Clip the protective leather proles onto the support rod
(Figs. 7 & 8).
Fig. 3
Middle
handle
Lower handle
Knobs
Bolts
Bolts
Fig. 4
Post
Handle bars
Tube
Support rod
Fig. 5
Tube
Support rod
Fig. 6
Protective leather
proles
Fig. 7