SDS
3
Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures Comply with applicable regulations.
Storage Conditions Store in a dry, cool and well-ventilated place. Keep container closed
when not in use. Keep/Store away from extremely high or low
temperatures, direct sunlight, heat, ignition sources, and incompatible
materials.
Incompatible Materials Strong acids. Strong bases. Strong oxidizers.
Section 8: Exposure Controls/Personal Protection
Control Parameters No Occupational Exposure Limits (OELs) have been established for this
product or its chemical components.
Appropriate Engineering Controls Emergency eye wash fountains and safety showers should be available
in the immediate vicinity of any potential exposure. Ensure all national/
local regulations are observed. Ensure adequate ventilation, especially in
conned areas
Personal Protective Equipment Protective goggles. Protective clothing. Insucient ventilation: wear
respiratory protection. Gloves.
Materials for Protective Clothing Chemically resistant materials and fabrics.
Hand Protection Wear chemically resistant protective gloves.
Eye Protection Chemical goggles or face shield.
Skin and Body Protection Wear suitable protective clothing.
Respiratory Protection Use NIOSH-approved air-purifying or supplied-air respirator where
airborne concentrations are expected to exceed exposure limits.
Section 9: Physical And Chemical Properties
Appearance/ Physical State White Solid Pellets. Odorless.
Vapour Pressure (mm Hg at 20°C) 0.009
Vapour Density (Air = 1.0) Not available.
Bulk Density Not available.
Solubility in Water Water Soluble.
Specic Gravity (gm/cc, Water = 1.0) 2.2
% Volatile by Volume Non-volatile.
Boiling Point Not available.
Melting Point Not available.
Coecient of Water/Oil Distribution Not available.
pH 10
Section 10: Stability And Reactivity
Chemical Stability Stable under normal conditions.
Reactivity When heated to decomposition, emits toxic fumes. Toxic Gas.
Possibility of Hazardous Reactions Polymerization occurs with calcium chloride when mixed with methyl
vinyl ether.
Conditions to Avoid Direct sunlight. Extremely high or low temperatures. Incompatible
materials.
Incompatible Materials Strong acids. Strong bases. Strong oxidizers. Reactive metals.
Hazardous Decomposition Products Toxic gases. Hydrogen chloride. Chlorine. Sodium oxides. Oxides of
magnesium. Oxides of calcium.