Replacement Part List

4. Disassemble the right side cover by removing the ve (5)

screws that hold it in place (Fig. 20).

5. Secure the auger and remove the auger assembly nut

(Fig. 21).

6. Remove the auger axle set (Fig. 22).

7. Remove the old auger from the housing (Fig. 23).

8. Install the replacement auger by following the above steps

in reverse order (Fig. 24).

Replacing the Belt

mWARNING! Make sure to turn o the switch and

remove the battery before performing any maintenance task on

your hybrid snow shovel.

1. Disassemble the left side cover by removing the ve (5)

screws that hold it in place (Fig. 17).

2. Remove the old belt from the body by slowly turning the

auger while lifting the belt (Fig. 25).

Fig. 20

Fig. 21

Auger assembly nut

Fig. 22

Auger axle set

Fig. 23

Auger

Fig. 24

Fig. 25

Belt

Auger