Replacement Part List

8
Technical Data
Motors ................................ Plowing motor: 4000 W brushless
Drive motor: 500 W brushless
Battery Voltage* Max ............................................... 100 V D.C.
Battery Capacity ................................................... 5.0 Ah (each)
Battery Run Time Max ................................................... 25 min
Clears up to 3,215 sq ft of 3" snow
Charger Input ................................................... 100 – 120 V AC,
50 – 60 Hz, 520 W
Charger Output ................................................. 100 V DC 4 A
Charging Time Max ...................................... 1 hr 40 mins each
(for full charge)
No Load Speed ............................. Auger: 116 rpm to 143 rpm
Impeller: 1200 rpm to 1522 rpm
Auger .................................................... 2 serrated steel blades
Clearing Width ..................................................... 24 in. (61 cm)
Depth of Snow Cut ........................................ 17.5 in. (44.5 cm)
Throw Distance Max ............................................... 40 ft (12 m)
Plowing Capacity Max ......................................... 1720 lbs/min
(780 kg/min)
Stages ..................................................................... Dual stage
Drive Type ........................................................... Self-propelled
Type of Snow ........................................................... Light, uy
Tire ..................... 15 inch (38 cm) knobby tracassist snow tires
Tire Pressure .................................................................... 20 psi
Directional Control ................................ 180º auto-rotate chute
Light ......................................................... Six 3 watt LED lights
Weight (snow blower alone) ........................ 127.2 lbs (57.7 kg)
Weight ............................................................... 141 lbs (64 kg)
(snow blower with batteries installed)
*Initial no-load voltage, when fully charged, peaks at 100 volts; nominal voltage
under typical load is 86.4 volts.
Unpacking
Carton Contents:
• Cordless snow blower with lower handle
• Upper handle assembly
• Discharge chute assembly
• Handle knob (4) + bolt (4)
• Chute nuts (2)
• Cord clip
• Open end wrenches (2)
• iON100V-5AMP lithium-ion batteries (2)
• iON100V-RCH battery quick charger
• Manuals with registration card
1. Carefully remove the cordless snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless snow
blower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suocation risk!
Battery Pack Operation
This equipment is powered by two iON100V-5AMP lithium-
ion batteries. The battery packs are completely closed and
maintenance free.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button to
read o the battery charge level from the LEDs of the battery
indicator (Fig. 1):
NOTE
The snow blower can only be powered by two 100 V
5.0 Ah batteries (included). Do not use batteries with
lower capacity, which will be overheated easily due to
the high working current of this machine.
Fig. 1
Charge level indicator push button
Press