Warranty
22 
30SB, 36SB, 45SB 
Snow BEAST  
Snow BEAST Snow Blower 
Rev Sept 2019 
Storage Instructions 
Short Term Storage 
 Let engine cool before storing and do not store 
near flame, high heat, and possible ignitions from 
sparks. 
 Always clean off all flammable material as well as 
grime and dirt before storage. 
 Wash with mild detergent and water only. 
 After washing the machine engage the engine at 
high and let the snow blower run for 5 minutes. 
 Store snow blower only on the ground. 
 Do not drain fuel indoors or near a flame. 
 Always park machine on level ground. 
 Store the machine in a clean and dry environment. 
 Always remove the safety key and ground the 
spark plug to the engine. 
 Always run the snow blower before storage to 
clear up snow to prevent freeze up. 
 Check all parts to see if they are in working 
condition. 
Extended Storage 
 Change air filter. 
 Make sure all fuel is drained before storing. 
 To ensure all fuel is drained from the snow blower, 
turn the fuel valve off, then run the snow blower 
until it runs out of gas before storage. 
 Add a fuel stabilizer to fresh fuel on the last 
refueling day. 
 Check the spark plugs condition and pour two 
tablespoons of engine oil in the spark plug holes 
and leave the spark plugs off. 
 Cover the machine when in storage. 
 Everything mentioned in short term 
storage should also be applied to extended 
 storage. 










