Manual

Inspection and Maintenance schedule
104044-001 AB62 Work Platform - Operator Manual Page 17
D AILY P REVENTATIVE M AINTENANCE C HECK L IST
M
AINTENANCE
T
ABLE
K
EY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
P
REVENTATIVE
M
AINTENANCE
R
EPORT
Date: _______________________________________
Owner: _____________________________________
Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
COMPONENT INSPECTION OR SERVICES Y N R
Battery Check electrolyte level
Engine Oil and Filter
Check level and condition
Check for leaks
Engine Fuel System
Check fuel level
Check for leaks
Check air cleaner
Engine
Coolant
Check coolant level (with engine cold)
Hydraulic Fluid Check fluid level
Hydraulic System Check for leaks
Emergency Hydraulic
System
Operate the emergency lowering valve and
check for serviceability
Controller Check operation of all controls
Control Cable
Check the exterior of the cable for pinching,
binding or wear
Platform Floor and
Rails
Check fasteners for proper torque
Check welds for cracks
Check condition of platform
Check condition of anchorage points
Check condition of operator manual
Tires
Check for damage
Check air pressure (5,5 bar
[80 psi]
)
Hydraulic Pump Check for hose fitting leaks
Hydraulic Drive
System
Check hydraulic drive motor operation
Check hoses,fittings, and valve block for leaks
Torque Hubs Check for leaks
Steering System Check for missing/loose retainers
Elevating Assembly
Inspect for structural cracks
Check members for deformation
Chassis
Check hoses for pinch or rubbing points
Check welds for cracks
Turret Check ring gear for proper lubrication and wear
Entire Unit Check for and repair collision damage
Labels
Check for peeling, missing, or unreadable labels
& replace
COMPONENT INSPECTION OR SERVICES Y N R