Manual
Table Of Contents
- AB62
- Operator Manual
- Contents
- Introduction
- General Description
- Controls and Indicators
- Pre-Operation Safety Inspection
- Operation
- Controller Functions
- Emergency Stop
- Service Horn
- Starting the Engine
- Driving
- Steering
- Positioning the Platform
- Multifunction Controls
- Lower Control Operation
- Upper Control Operation
- Leveling the Platform
- Rotating the Turret
- Elevating the Riser
- Elevating the Upper Boom
- Extending the Upper Boom
- Elevating the Jib
- Rotating the Platform
- Switching Fuels (LPG Option)
- Emergency Operation
- After Use Each Day
- Towing
- Transportation
- Daily Maintenance
- Inspection and Maintenance schedule
- Safety Labels
- Specifications
Operation
104044-001 AB62 Work Platform - Operator Manual Page 11
E
XTENDING
THE
U
PPER
B
OOM
1. Set the Function Speed control dial to the desired setting. Rotate the dial clockwise to increase speed,
counterclockwise to decrease. If you are not sure what speed to use, start out slow; the speed can be
varied while operating the function.
2. While depressing the foot switch, push the Boom Extend control lever rearward to extend the boom, for-
ward to retract the boom. Release the control lever to stop extending/retracting.
E
LEVATING
THE
J
IB
1. Set the Function Speed control dial to the desired setting. Rotate the dial clockwise to increase speed,
counterclockwise to decrease. If you are not sure what speed to use, start out slow; the speed can be
varied while operating the function.
2. While depressing the foot switch, push the Jib control lever forward to elevate the jib, rearward to lower
the jib. Release the control lever to stop elevating/lowering.
R
OTATING
THE
P
LATFORM
1. While depressing the foot switch, push the Platform Rotate control lever right to go counterclockwise and
left to go clockwise. Release the lever to stop rotation.
S
WITCHING
F
UELS
(LPG O
PTION
)
1. With the engine running, turn the fuel selector switch to the opposite position.
• The engine should continue running on the selected fuel.
2. If the engine stalls, check the following:
• check the fuel supply in the selected tank.
• if LPG is selected, make sure that the valve is open on the tanks.
3. Restart the engine.