Manual

Chapter 7 – Prestart Inspection
AB46JRT – 0260071 37
0072530
0182236
Ma intain 10 feet minimum cle arance from electrica l powe r lines a nd apparatus.
You mus t allow for platform s way, rock, or s a g.
T his aerial device does not provide protection from contact with or proximity to an
electrica lly cha rged conductor.
Dea th or s erious injury will result from s uch contact or inade qua te clearance .
DA NG E R
E L E C T R O C UT IO N HA ZA R D
T HIS MA C HINE IS NOT E L E C T R IC AL LY INS UL ATE D
007 2530
0072530
Upper Controls
0151410
Radiator
0151410
Platform
0072531
0072531
0072541
• Do not operate this machine unless you are a qualified operator and have read and
thoroughly understand all information given in the Operator’s Manual and on DANGER
and CAUTION signs on this machine.
• Maintain 10 feet minimum clearance from electrical power lines and apparatus.
This machine is NOT electrically insulated.
• Do not exceed the unrestricted platform capacity shown on the platform.
• Do not operate this machine on soft or unstable ground.
• Operate this machine only on a flat level surface.
Death or serious injury can result from not complying to the following safety rules.
0072541
0182236
• Perform the PRESTART INSPECTION, in the Operator's Manual, prior to each work shift.
• Platform occupants MUST wear fall restraint attached to lanyard anchor points provided.
• In case of emergency, depress EMERGENCY STOP button. Pull out to reset.
• Do not use boom to lift or push this machine.
• Move controls slowly and deliberately to avoid jerky and erratic platform movement.