User guide

❑
Level Sensor
The level sensor detects how far out of level the
turntable is. If the turntable gets over 5° out of
level the level sensor activates the tilt alarm
(described in this chapter).
❑
Motion Warning Alarm
The optional motion warning alarm emits a loud
beeping sound, at ground level, anytime the
Drive/Steer controller is in FORWARD or
REVERSE or anytime the booms move. This
alarm alerts people on the ground that the AB46J
is traveling along the ground.
❑
Platform Swinging Gate
The optional platform swinging gate is designed
to automatically close after you enter or leave the
platform.
It helps prevent people from falling off the
platform.
❑
Tilt Alarm
The tilt alarm warns the AB46J operator that the
AB46J is over 5° out of level.
If the tilt continues to increase, the AB46J will
eventually tip over.
When you hear the loud two toned alarm,
(high-low-high-low...), immediately retract and
lower the platform. When the platform is
completely down, determine and correct the
cause of the tilt before raising the platform
again.
page 2 - 4 AB46J – 0163187
2. Safety Devices
CAUTION