User guide

Daily Preventative Maintenance Checklist
22 A62JRT – 104850-000
ITEM INSPECTION OR SERVICES Y N R
Operator’s Manual In place, all pages readable and intact
Engine
Oil level Between full and add marks
Coolant Proper uid level
Radiator Cap tight, good condition and clean
Fuel tank and line Tank full, cap in place and tight/ no leaks
Electrical System
Battery Condition and charged for proper operation
Battery fluid level and terminals Proper level/clean, connectors tight
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between full and add marks
Hose, tubes and fittings No leaks
Cold weather warm-up kit Proper operation
Tires Good condition
Wheels All wheel lug nuts present and properly torqued
Lower Control Station
Operating controls Proper operation
Emergency stop and emergency power Shuts off lower controls/proper operation
Level Sensor Sounds tilt alarm
Flashing Light Proper operation
All Motion Alarm Sounds when machine is operated and/or driven
Structures
Weldments – Chassis, turntable, booms, platform, etc. Welds intact, no damage or deformation
Slide pads In place, no damage or deformation
Fasteners In place and tight.
Upper Control Station
Guardrail system and lanyard anchors Welds intact, no damage or deformation
Operating controls – Boom functions, drive, brakes, etc. Proper operation
Emergency stop and emergency power Shuts off upper controls/proper operation
Horn Sounds when activated
Placards and Decals In place and readable
Maintenance Table Key: Y = Yes/Acceptable, N = No/Not Acceptable, R = Repaired/Acceptable
Daily Preventative Maintenance Checklist
Preventative Maintenance Report
Date:
Owner:
Model No:
Serial No:
Serviced By: