Operation Manual

www.versluisautomotive.nl Ver.0.2-K_O / 111212

Note: the pre-setting of map’s path is:

\SDMMC DISK\VCA2011_NAVI\NAVI\VCA2011_NAVI.EXE

By above steps, you can change map’s path for your own VCA2011.

3. Steps of Firmware Updating:

Put the appropriate file to SD card and plug SD card into the device,

then press the button of “Update Firmware” and wait for the system

to finish Firmware updating.

a. Firmware updating should be finished several mintutes.

b. If you found updating stuck, please restart navigation box

and try again.

c. During firmware updating, please don’t operate VCA2011.

Save