Operation Manual

52
Return to contents
7.2
Scroll Map
By pressing this icon you can manipulate the map by touching and moving your nger on the screen.
7.3 or Day or Night Settings
Bright colours are normally used for the mapping display so that you can see the map more clearly, even in bright
sunlight. When it is dark outside however, you may want to switch to the Night Mode as the daytime setting will be too
bright.
The navigation view will then be displayed using dark and subdued colours that will not interfere with your night vision.
Use Day to revert to the original colour scheme.
Please note: If you switch the unit off and then back on the display reverts to your previous personalised setting.
7.4 Camera Alerts (Only applicable if you have subscribed to
the Enigma Camera Database)
This function allows you to temporarily disable the safety camera alerts. If
you press the camera icon you can turn the camera alert on or off. A
symbol is displayed in the top right hand corner of the display to indicate
that the alert has been switched off.
To restore the camera alerts press the top of the Syrius’s display to show
the drop down menu and then press the camera icon.
Please note that if the unit is switched off and then switched back on the camera alerts are automatically
enabled.
7.5 Magnify or Reduce Function
The map on the display can be magnied or reduced by pressing on the or buttons displayed when the drop down
menu. This will also show the quick menu at the base of the display.