Operation Manual

68 • UK
Return to contents
8series100614
Press the right hand arrow to move to the next menu screen
5.7 GPS status
You can check the health of the GPS connection of your unit at any time as well as being able to see the exact coordinates of your
current position by using this feature.
 Press the centre of the screen to enter the ‘Navigate to’ menu.
 Press the ‘Configure’ button.
 Press the arrow once.
 Press the ‘GPS status’ icon.
Your current GPS status will then be displayed. If you wish to revert the GPS engine to the factory default, press the ‘Reset’ button.
If you wish to exit the ‘GPS status’ menu press the return arrow
located in the bottom right hand corner of the display.
5.8 Change Map Colour
This function allows you to choose between the alternative colour
schemes that are available for the maps used in the Snooper system
(several of which are most suitable for use at night). To access this
facility:
 Press the centre of the screen to enter the ‘Navigate to’ menu.
 Press the ‘Configure’ button.
 Press the arrow once.
 Press the ‘Change map colour’ icon.
Use the arrows to the left and right hand side of the map display to cycle through the different colour schemes. There are ten colour
schemes to choose from.
To save the changes press the ‘OK’ button at the bottom of the display.
If you wish to keep the settings unchanged, you can exit the ‘Change map colour’ menu by pressing the return arrow
located in the bottom right hand corner of the display.