Operation Manual

UK • 8
Return to contents
8. Set Alert Tone
There are three audible settings to choose from:
Hard Tone
Soft Tone
Off
To select your alert tone:
Enter the menu and scroll until ‘Set alert tone’ is displayed. 
Highlight your desired option and press the ‘OK’ button to confirm your selection.
9. My-Speed alert
This safety feature has been designed to let you program My-Speed to alert you when you reach any speed you choose.
To set My-Speed alert:
Enter the menu and scroll until ‘My-Speed alert’ is displayed and press the ‘OK’ button.
Use the up and down buttons to increase or decrease the speed limit you would like to be alerted to and press the ‘OK’ button to 
confirm your selection.
Note: The speed limit alert will only activate once you exceed your speed limit setting. If you remain above your speed limit you
will not receive another alert until your speed drops below your speed limit setting and you then increase your speed again.
10. Speed limit alerts
My Speed will alert you audibly to speed limit changes and when you exceed a speed limit. Both audible alerts are set to ‘On’ as the
factory default setting but can be switched off individually if required.
To change the audible alert settings:
Enter the menu and scroll until ‘Audible alerts’ is displayed and press the ‘OK’ button.
Use the up and down buttons to select either ‘Speed zone’ if you want to change the audible alert heard when you drive from one 
speed to limit to another. Or select ‘Speed limit’ if you want to change the audible alert heard when you exceed the speed limit of
the road you are travelling on.
11. Change language
To change language, enter the menu and scroll until ‘Change language’ is displayed and press the ‘OK’ button. Next scroll until the
language you require is displayed and press the ‘OK’ button to confirm your selection.
12. Adjust Brightness
You can adjust the brightness of the display to accommodate different driving conditions.
To adjust the brightness of the display
Enter the menu and scroll until ‘Adjust Brightness’ is displayed and press the ‘OK’ button.
Use the up and down buttons to adjust the brightness to the desired level and press the ‘OK’ button to confirm your selection.
13. Satellite Status
My-Speed comes with a facility to check the GPS status. Enter the menu and scroll until ‘Satellite Status’ is displayed and press the ‘OK’
button.