User manual
Contents Page What’s included 3 Features 4 Installing My-Speed 5 Installing My-Speed using the Suction Cup bracket Intstallation Trouble shooting 6 Replacing the fuse Operating Instructions 7 1. Using My-Speed for the first time 2. Standby Screen 3. Screen themes - Display face 4. Adjusting the Volume 5. ‘P’ User point button 6. Muting an alert 7. Cancelling an Alert 8. Set Alert Tone 8 9. My-Speed alert 10. Speed limit alerts 11. Change language 12. Adjust Brightness 13.
What’s included 1 x Snooper My-Speed 1 x Windscreen suction cup bracket 1 x USB PC connection lead 1 x USB cigarette lighter adaptor 1 x CD ROM PLEASE NOTE Due to our desire to continually improve our products, the specification may change without notice.
Features 1 Standby/Power Putton 5 Menu button 2 User Point Button 6 USB Socket 3 Full Colour Graphical Display 7 Volume/Menu Navigation Control 4 OK button 8 Windscreen Bracket Mounting Slots 1 3 2 4 7 5 8 6 9 11 10 9 Time Display 10 GPS Signal Strength 11 Compass Direction 17 Speed Limit 18 Your speed 19 Speed trap alert 17 18 If we do not have access to the official speed limit for a stretch of road My Speed will sometimes display a speed limit accompanied by an asterisk (*)If the speed
Installing My-Speed My-Speed comes with a windscreen suction cup bracket to mount the unit on to your vehicles windscreen. When installing your My-Speed please consider the following: ●● ●● The unit’s built-in GPS antenna has a clear view of the sky. It is located in a position where you can easily view the LCD display without having to take your eyes too far from the road ahead and that you can reach the controls safely.
If the device does not power up please check that the cigarette lighter socket is clean of any debris, remembering not to insert metal objects into the socket. Check that the cigarette lighter adaptor is inserted all the way into the socket and check that the fuse in the cigarette lighter adaptor is operational. If My-Speed will still not power up, please check that the cigarette lighter in your vehicle is functioning correctly.
Operating Instructions 1. Using My-Speed for the first time Make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings so that the built-in GPS antenna has as clear a view of the sky above. Switch the unit on by pressing the Power button for two seconds. The LCD display will briefly display the ‘My-Speed’ logo, then the speed limit of the road you are currently travelling on. My-Speed needs to acquire a minimum of four satellites in order to work.
. Set Alert Tone There are three audible settings to choose from: ●● Hard Tone ●● Soft Tone ●● Off To select your alert tone: ●● Enter the menu and scroll until ‘Set alert tone’ is displayed. ●● Highlight your desired option and press the ‘OK’ button to confirm your selection. 9. My-Speed alert This safety feature has been designed to let you program My-Speed to alert you when you reach any speed you choose.
14. Speed Type This feature allows you to choose between either kilometres per hour (KMH) or miles per hour (MPH). The device is supplied with MPH turned ON as the factory default setting. ●● Enter the menu and scroll until ‘Speed Type’ is displayed and press the ‘OK’ button. ●● Highlight either ‘MPH’ or ‘KMH’ and press the ‘OK’ button to confirm your selection. 15. Key Sound When pressing any of the buttons on My-Speed an audible beep is heard.
Speed camera detection As well as alerting you to speed limits and speed limit changes My-Speed also alerts you to speed traps and cameras. 1. Registering and downloading My-Speed. First register My-Speed at www.snooperneo.co.uk where you will also find information on subscription costs. Next add the My-Speed updater software to your PC using the CD Rom provided. Put the CD Rom in to the CD drive of your PC and follow the simple on-screen instructions displayed.
The Smart Mute setting provides an alternative alert when approaching a speed trap. If you are travelling below the posted speed limit when approaching a speed trap the unit will provide only a brief audible alert but will then automatically mute the audible alert completely giving you only a low level visual alert. If you are travelling above the posted speed limit however, you will receive both an audible and a visual alert as normal.
Customer services and troubleshooting If you need further advice on the operation of My-Speed or are experiencing any problems please visit the Troubleshooting section of our website www.snooperneo.co.uk If you cannot find the information you are looking for please contact our technical department on 01928 579 579. Service under Warranty Your My-Speed comes with a standard one year manufacturer’s warranty.
