Quick Start Guide

EN • 5
Using Laser Pod as a stand-alone laser detector.
Laser Pod can be used as a stand-alone laser detector without a satellite
navigation system.
Mounting Laser Pod on the windscreen of your vehicle
You can mount Laser Pod anywhere on the front windscreen of your vehicle
using the suction cup bracket provided. Simply slide the suction cup bracket
into the slot on the back of the unit, then select an area on the windscreen
where Laser Pod will have a clear view of the road. Thoroughly clean the
area of glass where you intend to mount your Laser Pod and then press the
suction cup bracket and Laser Pod into place.
Finally, connect the USB plug on the end of the car charger to the DC 5V IN
socket on the Laser Pod and plug the other end into the cigarette lighter
socket of your vehicle. Laser Pod will power on automatically, the blue LED will
flash and the unit will beep three times. Your Laser Pod is now ready to use.
Mounting Laser Pod on the rear view mirror of your
vehicle
In some vehicles it may be possible
to mount Laser Pod on the back
of your rear view mirror. Take your
Laser Pod and see whether it is
suitable to mount it on the back of
the mirror. You need to mount your
Laser Pod so that you can clearly