Quick Start Guide

EN • 4
Connecting Laser Pod
Your Laser Pod has been supplied with a 5V car charger and three different
connector cables. First, connect the car charger supplied to the DC 5V In
socket on the underside of your Laser Pod. Next, select the connector cable
that is compatible with the DC 5V In socket on your sat nav. Once you have
selected the appropriate connector cable, connect it between the DC 5V
Out socket on Laser Pod and the DC 5V In socket on your sat nav as per the
diagram below.
Once you have successfully mounted Laser Pod to your sat nav system and
connected the appropriate connector cables, mount your sat nav system
together with Laser Pod into your vehicle as normal. Next, power both Laser
Pod and your satellite navigation system by connecting the car charger to
your vehicles cigarette lighter socket. Both Laser Pod and your sat nav will
be powered from the Laser Pod car charger supplied. Laser Pod will emit a
short beep and the blue LED will illuminate to confirm it has powered up
successfully. Your Laser Pod is now ready to detect.
12V
Laser
Pod
Sat Nav
Car charger
DC 5V In
DC 5V Out