Operation Manual

9
Installing the Evolution
For best results mount the Evolution onto the vehicles windscreen, although it
can be mounted on the dashboard with the hook and loop fastener.
When installing your Snooper Evolution please ensure that:
•
The unit, with its built in GPS antenna has a clear view of the sky*
•
It is located in a position where you can easily view the LED text display
without having to take your eyes too far from the road ahead and that you
can reach the controls safely.
•
Does not interfere with the vehicles controls
•
Does not jeopardise the drivers or passengers safety
•
You will be able to remove the device to perform downloads.
*Please Note: Some vehicles may come with a ‘Heat Reflective’, ‘Metal
Oxide’ or ‘Athermic’ windscreen which may affect the performance of
the built in GPS antenna. If you are unsure what type of windscreen is
fitted to your vehicle then please contact your local vehicle dealer or
manufacturer for further information. In these situations you will need to
purchase an external GPS antenna, which can be positioned either on
the rear parcel shelf or outside the cabin of the vehicle.
Once you have found a suitable location for your Evolution secure it in place
by using either the suction cup windscreen bracket provided or the ‘Hook and
Loop’ fastener. More detailed installation instructions follow.
PLEASE NOTE: Be careful to choose a location that does not block the
drivers view or where it might endanger the driver or passengers should your
vehicle suddenly come to a stop or be involved in an accident.
Installing the Evolution
Installing the Evolution
DO NOT leave the unit in view when the car is stationary during hot
conditions. Exposing the Evolution to extremely high temperatures
can temporarily impair performance. Keep the Evolution out of
sight when not in use to help avoid potential theft.
RS232
RD
Windscreen
Dashboard
Return to contents