Operation Manual

8
Downloading
Performing a download is simple.
1 Switch on your PC.
2 Connect the computer to the Internet.
3 Right click on the Evolution Updater icon and left click ‘Download Settings’
and select the database files your require. Once selected click ‘OK’.
4. Connect the USB lead to your computer and plug the other end of the
lead into your Evolution in the socket marked USB.
5. Switch on the Evolution by turning the rotary on/off switch towards you.
6. The software will launch automatically.
The download process is as follows:
•
The software will display the serial number of your Evolution and a red
progress bar will start to progress across the screen.
•
The software will then connect to the database server and then download**
the database.
•
The Evolution will then save the data received.
•
Once the download is complete the Evolution software will instruct you to
disconnect the unit from the PC.
** If you have a Firewall on your computer the Firewall software will inform
you that the Evolution Updater software is trying to access the internet.
Please make sure that you grant/allow/permit/unblock access through the
Firewall. Please read the messages supplied by your Firewall software
carefully before choosing your option. If you do not allow the program to
access the internet through the Firewall, the download process will fail.
Please note: Windows XP SP2 comes with a built-in firewall as standard.
As there are constant additions to our database you will need to perform
regular downloads. The frequency with which you do this is entirely up to you,
but we recommend that higher mileage drivers often driving on unfamiliar
roads download once or twice a week whereas lower mileage drivers perform
a download once or twice per month.
Please Note: You MUST register the unit first before you can perform a
download.
Downloading
Downloading
Return to contents