Operation Manual

Software CD

Before you can begin downloading the database onto your Snooper Evolution

you will need to install the driver software for the USB PC connection lead

first and then the Evolution Updater software that enables you to do this.

There is a certain minimum amount of hardware and software requirements

needed in order for the software to be installed and used successfully.

Hardware Requirements

The computer must have an Intel Pentium Class processor or equivalent, a

minimum of 32MB of RAM, a monitor with 256 (8 bit) colours or greater, a CD

ROM drive, 20MB of free disc space and a spare USB connection.

Software Requirements

The software will only operate on the following Windows based operating

systems - Windows 2000, Windows XP and will only work with Internet

Explorer 4.5 or Netscape Navigator 4.5 or above.

NOTE: The Snooper Evolution Updater software does not support Windows

95/98/98SE, Millennium and Apple Macintosh operating systems.

Software Installation Instructions

Place the Software CD into the CD ROM drive. Your PC should automatically

open a window displaying the instructions for installing the USB and

download software.

To launch the CD manually: Click on Start and then Run. In the dialogue box

that opens click on Browse – another dialogue box will open. Locate your CD

ROM drive (drive letter is normally D) using the ‘Look in’ option and select

‘Menu’ from the lower portion of the dialogue box. Once you have selected

‘Menu’ click on Open on the explorer box and then OK on the Run dialogue

box.

Follow the instructions carefully installing the USB driver first and then

installing the Evolution download software.

Any later software updates or packages can be obtained from

www.snooperneo.co.uk

NOTE: YOU WILL NEED TO RESTART YOU COMPUTER ONCE YOU

HAVE INSTALLED THE SOFTWARE BEFORE ATTEMTPING A

DOWNLOAD.

Once the software is installed you are ready to download the database to

your Evolution. An icon for the ‘Evolution Updater’ will now appear in the

bottom right hand corner near the clock on your desktop. This program runs

automatically each time you switch on your PC, there is no need to open the

program manually.

Software CD

Return to contents