Operation Manual

20
using this option it will automatically delete the coordinates displayed. Any
coordinates stored will be listed in numerical order – MEM 01, MEM 02, MEM
03 etc. Use buttons 1 or 2 to scroll up or down to view your stored
coordinates.
If you wish to clear all your personal locations press the SELECT button
when ‘All Clr’ is displayed. The unit will display the message ‘Del All?’ press
the SELECT button again and the unit will confirm that they have been
deleted by displaying ‘All Clrd’ and will then return to the Menu.
7. Smart
The Smart Mute setting provides an alternative alert when approaching a
fixed safety camera. If you are travelling below the posted speed limit the unit
will provide an audible and visual alert but as the unit counts down the
distance to the fixed safety camera the rest of the alert will be a visual alert
only. If you are travelling above the posted speed limit you will receive both
an audible and a visual alert as normal. Once you drop below the posted
speed limit for that fixed safety camera the audible alert will cease and the
unit will only provide a visual alert.
To adjust the Smart Mute setting press either the MODE/MENU button or the
MUTE/CANCEL button, select your preferred setting of either ON or OFF and
then press the SELECT button. The unit will confirm the new setting by
displaying ‘Changed’ twice and will return to the Menu.
8. Logic
There are a number of different ways that you can programme your Snooper
Evolution to locate fixed cameras. You can choose between three different
Logic Modes:
Logic 1
When this mode is selected your unit will alert you via your chosen audible
alert as well as visual alerts of fixed cameras on both sides of the road.
Logic 2 (Factory Default Setting)
When this mode is selected your unit will alert you via your chosen audible
alert as well as visual alerts of fixed cameras on your side of the carriageway
only. The unit will not indicate the presence of cameras or monitoring vehicles
on the opposite side of the carriageway as you approach them.
Logic 3
When this mode is selected your unit will alert you with a hard tone audible
alert as well as visual alerts of fixed cameras on your side of the carriageway
but will only give you a soft tone audible alert and a visual alert of cameras on
the opposite side of the carriageway as you approach them. If you have voice
alerts selected you will get a voice alert as well as visual alerts of fixed
cameras on your side of the road and just a soft audible and visual alert of
cameras on the other side of the carriageway.
Selecting Your Preferred Logic Mode
To change the logic mode press either the MODE/MENU button or the
MUTE/CANCEL button to select your preferred logic mode. Once you have
Features and Settings
Features and Settings
Return to contents