Operation Manual

19
Once you have chosen your desired setting press the SELECT button. The
unit will confirm the new setting by displaying ‘Changed’ twice and will then
return to the Menu.
3. Bright
There are three settings that you can choose from for the brightness of the
LED display. They are Bright, Dark or Dim.
To adjust the brightness press either the MODE/MENU button or the
MUTE/CANCEL button until your preferred setting is displayed then press the
SELECT button. The unit will confirm the new setting by displaying ‘Changed’
twice and will return to the Menu.
4. Set Time
The Snooper Evolution can be configured to display the time on the Standby
Screen. This reading is updated by the GPS Atomic Clock and is generated
directly from Greenwich Mean Time (GMT) and is completely accurate. The
device is supplied with a factory default setting of GMT+0.
To adjust the clock to British Summer Time press the MODE/MENU button
until ‘GMT + 1’ is displayed then press the SELECT button. The unit will
confirm the new setting by displaying ‘Changed’ twice and will then return to
the Menu.
To adjust the clock to Greenwich Mean Time press the MUTE/CANCEL
button until ‘GMT + 0’ is displayed then press the SELECT button. The unit
will confirm the new setting by displaying ‘Changed’ twice and will then return
to the Menu.
5. Voice
The Snooper Evolution has a selectable voice alert which is switched ‘ON’ by
default. This facility allows your unit to inform you exactly what type of
location you are approaching without you having to take your eyes from the
road. The unit also indicates the posted speed limit for that location.
To alter the settings for voice alerts use either the MODE/MENU button or the
MUTE/CANCEL button until your preferred setting (‘Voice ON’ to switch voice
alerts on or ‘Voice OFF’ to switch voice alerts off) is displayed then press the
SELECT button. The unit will confirm the new setting by displaying ‘Changed’
twice and will then return to the Menu.
6. MEM Edit
It is possible to add and edit your own personal locations on your Snooper
Evolution. To add a new location make sure you are stationary and parked in
a safe, legal manner then press and hold the ‘New Location’ button for
approximately two seconds.
To view your saved coordinates use either the MODE/MENU button or the
MUTE/CANCEL button to scroll up or down through the options until ‘Sel clr’
is displayed, then press the SELECT button. You can scroll through your
saved coordinates by using either the MODE/MENU or MUTE/CANCEL
buttons. Please note that if you press the SELECT button at any time while
Features and Settings
Features and Settings
Return to contents