Operation Manual

.8. Logic Modes

There are a number of different ways that you can programme your

Snooper Evolution to locate 'fixed' cameras such as Gatso cameras and

Truvelo cameras. You can choose between three different Logic Modes:

Logic 1 (Factory Default Setting)

When this mode is selected your unit will alert you via your chosen

audible alert as well as visual alerts of Gatso and Truvelo cameras on

both sides of the road. If you encounter a series of SPECs cameras the

Snooper Evolution has been designed to only ever detect systems on

your side of the carriageway.

Logic 2

When this mode is selected your unit will alert you via your chosen

audible alert as well as visual alerts of Gatso and Truvelo cameras on

your side of the carriageway only. The unit will not indicate the presence

of cameras or monitoring vehicles on the opposite side of the

carriageway as you approach them. Again the Snooper Evolution will only

alert you to SPECs systems that are on your side of the road.

Logic 3

When this mode is selected your unit will alert you with a hard tone

audible alert as well as visual alerts of Gatso and Truvelo cameras on

your side of the carriageway but will only give you a soft tone audible

alert and a visual alert of cameras or monitoring vehicles on the opposite

side of the carriageway as you approach them. The Snooper Evolution

will only alert you to SPECs systems that are on your side of the road. If

you have voice alerts selected you will get a voice alert as well as visual

alerts of Gatso and Truvelo cameras on your side of the road and just a

soft audible and visual alert of cameras on the other side of the

carriageway.

Selecting Your Preferred Logic Mode

To change the logic mode press either the MODE/MENU button (button

2) or the MUTE/CANCEL button (button1) to select your preferred logic

mode. Once you have chosen your desired setting press the SELECT

button (button3). The unit will confirm the new setting by displaying

'Changed' twice and will then return to the Menu.

9. Speed Limit (Lmt)

This safety feature has been designed to let you programme your

Snooper Evolution to alert you when you reach any speed you choose.

For instance you could set your unit to alert you when your speed

reaches 30mph so that you never accidentally stray over the speed limit.

To set the speed limit alert press either the MODE/MENU button (button

2) or the MUTE/CANCEL button (button1) to increase or decrease the

speed that you would like to be alerted to. Once you have chosen your

desired setting press the SELECT button (button3). The unit will confirm

the new setting by displaying 'Changed' twice and will then return to the

Menu.

Return to Contents Page