Operation Manual

22
To adjust the clock to Greenwich Mean Time (GMT) press either the
MODE/MENU button (button 2) or the MUTE/CANCEL button (button1)
until GMT is displayed then press the SELECT button (button 3). The unit
will confirm the new setting by displaying 'Changed' twice and will then
return to the Menu
5. Voice Alerts
The Snooper Evolution has a selectable voice alert, which means that if
you have this setting activated your unit will tell you exactly what you are
approaching without you having to take your eyes from the road. This
setting is switched 'ON' by default.
To alter the settings for voice alerts use either the MODE/MENU button
(button 2) or the MUTE/CANCEL button (button 1) until your preferred
setting ('Voice ON' to switch voice alerts on or 'Voice OFF' to switch voice
alerts off) is displayed then press the SELECT button (button 3). The unit
will confirm the new setting by displaying 'Changed' twice and will then
return to the Menu.
6. MEM Edit
It is possible to add and edit your own personal locations on your
Snooper Evolution Neo. To add a new location make sure you are
stationary and parked in a safe, legal manner then press and hold the
'New Location' button (button 3) for approximately two seconds.
To view your saved coordinates use either the MODE/MENU button
(button 2) or the MUTE/CANCEL button (button1) to scroll up or down
through the options until 'Sel clr' is displayed, then press the SELECT
button. You can scroll through your saved coordinates by using either the
MODE/MENU or MUTE/CANCEL buttons. Please note that if you press
the SELECT button (button 3) at any time while in this option it will
automatically delete the coordinates displayed. Any coordinates stored
will be listed in numerical order - MEM 01, MEM 02, MEM 03 etc. Use
buttons 1 or 2 to scroll up or down to view your stored coordinates.
If you wish to clear all your personal locations press the SELECT button
when 'All Clr' is displayed. The unit will display the message 'Del All?'
press the SELECT button again and the unit will confirm that they have
been deleted by displaying 'All Clrd' and will then return to the Menu.
7. Smart Mute
The Smart Mute setting has been specifically designed so that you will
receive a visual alert only if you are travelling below the posted speed
limit and are approaching a 'fixed' location such as a Gatso camera. If
you are travelling above the posted speed limit you will receive both an
audible and a visual alert as normal.
If you have the S100-RLD as an optional extra the Smart Mute setting
also activates a radar/laser filter designed to filter out any radar/laser
signals you should encounter whilst travelling below 20mph.
To adjust the Smart Mute setting press either the MODE/MENU button
(button 2) or the MUTE/CANCEL button (button1), select your preferred
setting of either ON or OFF and then press the SELECT button (button
3). The unit will confirm the new setting by displaying 'Changed' twice and
will return to the Menu.
Return to Contents Page