Operation Manual

displaying the standby screen and try again.

When you attempt to save the new coordinate and the display reads

'Mem Full' it means that the memory in your Snooper Evolution is

completely full. If you want to store any different coordinates you will have

to either delete some or all of the existing coordinates stored in the unit's

memory.

9. Deleting Stored Co-ordinates

If you would like to delete any of the coordinates you have stored in your

units memory simply enter the units Menu by pressing the MODE/MENU

button (button 2) for approximately two seconds. When 'Tone' appears on

the display use either the MODE/MENU button (button 2) or the

MUTE/CANCEL button (button 1) to scroll through the Menu options until

you see 'MEM Edit' and press the SELECT button (button 3).

Using buttons 1 or 2 you can select two further options of either 'Sel clr'

or 'All clr'. If you want to delete all the coordinates at once select 'All clr'

by pressing button 3. The display will show 'Del All?' press button 3

again to confirm your selection. Once all the coordinates have been

cleared the display will read 'All clrd'. If you would like to delete a specific

coordinate then you will need to select option 'Sel clr' and then using

button 1 or 2 scroll through the list of stored coordinates until the one you

would like to delete is showing on the display and press the SELECT

button (button 3). The screen will read 'Data clr' to confirm the coordinate

has been deleted

Features and Settings

Your Snooper Evolution neo has many different features and settings that

you can adjust very easily.

To get into the Menu of the user options press and hold the MODE/MENU

button (button 2) until the display reads 'Tone'. Once 'Tone' is displayed

use the MODE/MENU or the MUTE/CANCEL (button 1) buttons to scroll

through the options and then select your desired menu item by pressing

the SELECT (button 3) button.

Please Note: If you would like to exit the Menu at any time press and

hold the MODE/MENU button for approximately two seconds. The unit

will 'beep' twice and return to the Standby display. If you do not press any

buttons for a period of five seconds the unit will automatically exit the

Menu and return to the Standby display.

MODE/MENU

MUTE

/CANCEL

NEW LOCATION

SELECT

Return to Contents Page