Operation Manual

17
Whilst travelling through a SPECs series however, your Snooper
Evolution will provide both an audible and visual alert 250m before each
camera as well as indicating the number of each camera in the series i.e.
SPECs 2, SPECs 3 and so on, plus continuing to indicate every five
seconds between locations. When you reach the last camera in the
series the display will indicate 'SPECs End'.
Please Note: If you join a road in the middle of a SPECs series you will
automatically get a visual and audible alert, indicating the number of that
camera in the series, 250m before the first camera that you pass. The
display will indicate the number of that camera in the overall sequence.
If you would like to change the alert to a visual alert only press the
MUTE/CANCEL button to temporarily turn off the sound. If at any time
you would like to stop the alert, simply press and hold the
MUTE/CANCEL button.
Radar Alerts
If you have purchased the S100-RLD and have connected it to your
Snooper Evolution in the socket marked RD, you will be able to receive
radar alerts. The information provided is more basic than when you
receive an alert via GPS but is still effective.
When the unit first detects a radar source it will emit either a voice alert or
your chosen audible alert (a 'beep' that starts slowly and quickens as you
get closer to the source). At the same time the LED display will indicate
what type of radar you are detecting, then change to a signal strength
meter in the form of a series of 'blocks' and a strength level number that
will increase from 1 - 5 as you get closer to the source.
If your Evolution is alerting you to a fixed camera site and the camera is
of a type that emits radar your Evolution will indicate that the camera is
active by displaying an asterisk * to the right of the message 'Warning' on
the LED display.
MODE/MENU
MUTE
/CANCEL
NEW LOCATION
SELECT
MODE/MENU
MUTE
/CANCEL
NEW LOCATION
SELECT
Return to Contents Page