Operation Manual

13
2. Installation and Setup
2-2 Installation of the Recorder
Check location and installation conditions of the recorder. If you have not already done so then please refer to Cautions
before installation. (See Page 2: Safety Information)
Remember that a120º angle can be recorded with the recorder installed at the top, bottom or center of the windshield.
1
Clean the windshield with dry
fabric where the holder will be
positioned.
2
Remove the protective film from
the double-sided tape.
3
Attach the bracket to the
windshield.
- Make sure that the location of the
bracket is not in the driver’s line
of sight. Attach the bracket firmly
to the windshield.