Operation Manual

4. Secure the DAB2000 module with the supplied hook & loop tape and
screws. Please refer to the section on Securing the DAB2000 module,
Step by Step later in this user guide for further information.
5. Install the supplied DAB antenna; pl ease refer to Antenna Installation
Guide later in this user guide for installation instructions.
ATTENTION
1. We have fully tested the supplied DAB antenna to work with
DAB2000. If you replace it with a third party DAB antenna,
the performance may suffer.
2. For DAB2000 to work with the suppl ied active antenna, the
antenna power must be set to ON. DAB2000 can also work
with a passive antenna; t he antenna power must be set to
OFF. If you replace the supplied antenna with any third party
antenna, you must set the antenna power to OFF.
3. If you need to disconnect/connect the antenna from the
DAB2000, please unplug the DAB2000 from the vehicle power
adaptor first, to avoid possible damage to the antenna.
4. Damage resulting from the incorrect installation of the
antenna is not covered by the warranty.
5. Consult a professional installer if you have any issues or
concerns with the installation.