Operation Manual

To restore to factory settings
1. Press the MENU button and then turn the Rotary Knob [◄] [►] until
the screen shows 《 FACTORY 》.
2. Press the Rotary Knob to perform a factory reset operation.
3. If you want to reset the DAB2000, turn the Rotary Knob [◄] [►] to
find 《 YES 》 and then press the Rotary Knob for confirmation.
Otherwise, you can press the Rotary Knob to cancel while the screen is
showing 《 NO 》.
3.1 The screen will show 《 RESETING 》to indicate that factory reset is
in progress.
3.2 The system will perform a scan of available DAB stations
automatically after the factory reset is complete. You must switch the
vehicle radio to FM 87.6MHz to continue DAB listening.
Note:
Factory reset will erase all previous system settings and set them to
default.
To display software version
This function allows you to display the current software version of your
DAB2000.
1. Press the MENU button and then turn the Rotary Knob [◄] [►] until
the screen displays 《 VERSION 》.
2. Press the Rotary Knob to display the software version, the screen will
show the current software version number 《 x.x.x.x 》.
To upgrade software
This function is used by maintenance personnel only, to upgrade the existing
DAB2000 software to a new version.