Operation Manual

ATTENTION
The DAB2000 comes with the AFC function. In order to use this function,
your vehicle radio must have the AF (alternative frequency) feature, and
AF must be enabled. Please consult your vehicle radio manual or the
vehicle dealer for these requirements before using this function.
While working with the AFC function, there are possible factors that could
affect its normal operation:
1.
The FM sensitivity varies among vehicle radios and the sensitivity can
affect the AFC’s performance.
2. The algorithm implemented in each vehicle radio’s AF feature varies
and this can affect the radio’s FM frequency tuning when triggered by
AFC.
If the AFC function is unable to function normally, please disable AFC and
use the ‘Auto Scan’ mode instead. Refer to the next section To enable
auto scan.
To enable auto scan
If your vehicle radio does not have the AF feature, you must not enable AFC.
However, you can use ‘auto scan’ to automatically search for unused FM
frequencies for transmitting. When this function is activated, the DAB2000
will keep searching for available FM frequencies, and display these
frequencies whenever you need them. You may select one of them as the new
transmitting frequency and tune your vehicle radio to this new FM frequency
to receive DAB services continuously.
1. Press the MENU button and then rotate the Rotary Knob [◄] [►] until
the screen shows 《 FM MODE 》.
2. Press the Rotary Knob to confirm, and then rotate the Rotary Knob [◄]
[►] until the screen displays 《 AUTOSCAN 》.
3. Press the Rotary Knob to confirm, the function of ‘auto scan’ is now
enabled and the DAB2000 is operating in the ‘auto scan’ mode.