Operation Manual

MODE
 Select one of the three DAB preset modes to listen to DAB,
or the Aux mode to listen to an external audio source.
 Press and hold to scan for DAB stations.
FM
 Displays DAB2000’s current FM transmitting frequency.
 Select and set the FM transmitting frequency from a
manual setting or from one of the four memory presets.
 In ‘auto scan’ mode, select and set the FM transmitting
frequency from one of the three ‘auto scan’ frequencies.
 Press and hold FM to perform an immediate frequency
change.
Presets + & -
 Save or recall the 4 presets of DAB stations in a DAB preset
mode.
 Save or recall the 4 presets of FM transmitting frequencies
after FM is pressed.
Last Station
 Recall the last listened to DAB station.
 Press and hold to reset the FM transmitting frequency to
the frequency saved in FM preset 1. Within 30 seconds,
press and hold to return the frequency to 87.6 MHz.
MENU
 Enter MENU settings, press and turn the Rotary Knob
[◄] or [►] to navigate to menu items and settings.
 87.6MHz – Default FM transmitting frequency.
 FM MODE – select operating mode (AFC_H/AFC_L/
auto scan).
 FULLSCAN – A full scan for DAB stations within the
channel frequency 5A to 13F will be performed.
 ANTENNA – Set to ON for a certified active DAB
antenna, set to OFF for all other antennas.
 DABRESET – Clear all DAB stations presets for the
three DAB preset modes.
 FACTORY – Returns all settings to factory default
settings.
 VERSION – Displays the current firmware version.