Bike 270 Pro User Guide.
Safety Precautions. Use the power adapter included with the package, using power adapters other than the one provided will result in malfunction and could prove dangerous. Battery replacement should not be performed by consumers, only professionally trained maintenance personnel should do the removal of the cover and the internal components. Note: It may cause explosion if the battery is not properly replaced with the same or equivalent model.
Table of Contents. Introduction. .................................................................................................................................................................... 5 FEATURES. ........................................................................................... 6 PARTS AND FUNCTIONS. ........................................................................ 7 STANDARD ACCESSORIES. ....................................................................
Basic Operation without Setting ..................................................... 42 Speed Meter .................................................................................. 42 STATUS ICONS. ................................................................................... 43 Setting Up Memory-Map Bike 270 Pro. ...................................................................................................................... 44 QUICK SETUP. .....................................................
Odometer ....................................................................................... 60 GPS ............................................................................................... 60 Signal ............................................................................................. 60 Cold Start ....................................................................................... 61 Reset Device ..................................................................................
Introduction. Thank you for purchasing the Memory-Map Bike 270 Pro. The Memory-Map Bike 270 Pro comes with a sturdy feel and shape and is packed with great features. In addition, it is compatible with an optional ANT+ heart rate monitor straps, ANT+ bike cadence sensors and ANT+ bike speed sensors for anyone who wants to have in-depth analysis on their rides and accordingly sharpen their outdoor performance.
Features.
Parts and Functions. Front View 1.5’’ LCD screen Backlight Power/ Exit Start/Pause OK/Up/ Down/ Right/ Left button Rear View Mini USB Port Button Name Icon Power button Function Press to pause/ resume log when the device is turned on. Press for 3 seconds to power on/off the unit. Exit Exit to previous level of menu Backlight Press for 3 seconds to turn on/off the backlight. 5-Direction OK Use Left, Up, Right, and Down to select an option.
Standard Accessories. Please make sure the following accessories are included in the box. Please contact your supplier immediately if there are any missing items. Memory-Map Bike 270 Pro Bicycle Mounting Kit Quick Guide USB cable Optional Accessories.
Charging the Battery. Using the AC Charger 1. Plug the mini USB plug of the AC charger into the mini USB port at the back of the Memory-Map Bike 270 Pro. 2. Plug the AC charger into a wall outlet. When charging, the Power indicator shows . After charging is completed, the Power indicator shows . If the power indicator shows while charging, it means the charging is automatically disabled because of circuit protection at high temperature.
3. Place the rubber pad under the bike mount and attach the bike mount securely to the bike stem using the two cable ties. 4. Slide in the GPS on top of the bike mount until it snaps into place.
Downloading Track Logs To download the recorded track log and view it on your computer, firstly you will need to install the bundled ezPlanner Plus. Installing ezPlanner Plus 1. Download the PC ezPlanner software from snooperneo.co.uk. Follow the on-screen directions, saving the software to a PC or run. (You must register your device first before being able to access the software) 2. Click Next to begin the installation. The License Agreement screen opens. 3.
Click Finish to exit the wizard.
Starting ezPlanner Plus Once the ezPlanner Plus is well installed in your computer, the ezPlanner Plus icon will appear on your desktop as a shortcut. Double-click the icon to start ezPlanner Plus. The following opening screen appears and you are ready to use the software. For details, please refer to the included ezPlanner Plus user manual. Starting ezPlanner Plus The ezPlanner Plus will be automatically installed when the ezPlanner Plus is installed and the program icon will appear on the tool bar.
Connecting to a PC After the ezPlanner Plus is installed, you can now connect your Bike 270 Pro to your computer to download the recorded track log. Use the included mini USB cable to connect the Memory-Map Bike 270 Pro with your computer as described below. 1. Connect the mini USB plug (smaller) of the USB cable to the mini USB port at the back of the device. 2. Connect the USB plug (larger) or the USB cable to a USB port on your computer.
Introduction of 9 Function Modes Main Menu The main menu appears when the device is turned on by pressing the power button. 9 operation modes are displayed in the main menu including Sport, Plot, Follow Course, Training, Multiple Finder, Pedometer, Compass, History and Setting modes. Use the up/down button to scroll up/down and select the mode by pressing the OK button . To escape from mode and return to main menu, press This chapter describes respective functions of each mode. Sport Mode.
Sub Page 1 Speed & Distance: Displays current speed and distance. Sub Page 2 Altitude and Trip Time: Displays barometer altitude and the variation since the log started. Altitude reading is indicated on Barometer altitude and is displayed as users want to have the GPS altitude which will be displayed as set it through user definable pages on Sub Page 4 or 5. Sub Page 3 . If , they can HRM and CAD: (Heart Rate Monitor & Cadence) Displays current heart rate and cadence.
Sub Page 5 Carbon Saving: Displays amount of carbon dioxide emissions avoided or number of trees planted by not driving in one journey. This 5 way button icon shown on this page means the information shown on this page can be determined by users. Move the Up/ Down button to select the information to be displayed on Top or Bottom. Enter the Menu to select information. When finished, press the OK button to return to the previous level.
User Defined Screen Listed below are user defined screens of all combination.
Plot Mode. Plot mode shows track log in graph and in real time display without interruption. The real time transectional plot shows four units of sport information including: Altitude + Time Altitude + Distance Speed + Time Speed + Distance Plot Displays the graph for altitude and time. Use the down and up buttons to zoom in and zoom out. Use the right button to move the x- and y- along the graph.
Zoom Mode Zoom out /Zoom in Back to View Mode Show POI. Press again to disable the function. POI name will be displayed in the language edited in ezPlanner. Plot Mode Display Altitude/Speed plot The following x- and y-axis combinations are available: Altitude + Time Altitude + Distance Speed + Time Speed + Distance Orientation direction can be based on 1. GPS 2. Always north 3.
Select to toggle between Hide Track and Show Track. Information varies as it displays real-time sport information.
Follow Course Mode. Enter this mode to follow a well- recorded track or from history logs. To follow course, tracks can be acquired from one of the following methods: 1. Plan your routes with ezPlanner and then send it from the PC to Memory-Map Bike 270 Pro. Please refer to the ezPlanner user manual for details. 2. Get course directly from History log recorded in this device. Follow course from listed tracks List Displays the tracks currently stored on the Memory-Map Bike 270 Pro.
Follow course from history logs History List Displays the tracks logs currently stored on the Memory-Map Bike 270 Pro. Track details: All history logs are listed in time order followed by track distance. Move the up and down cursor to select the log. Press the OK button to review the log in details. Distance, time, maximum speed, average speed, calories, altitude, carbon reduction, trees planted, and the number of check points in the track.
Check Points Preview all checkpoints and the details of check points in one track. When a check point is selected, you will be prompted to confirm if the selected check point is the starting point to follow. Press the OK button to confirm. View Track Course in Speed Meter Mode View Track Course Loaded track can be displayed in four modes, i.e. Speed Meter, Plot Mode, Track View and Orientation. User left right button to switch between pages.
Show track on Plot Mode. View Track Course in Track View Shows Check Points on track; Zoom in / out for the loaded track.
Training. The Memory-Map Bike 270 Pro provides two kinds of training features including HRM (Heart Rate Monitor) and Cadence to notify users when a pre-determined setting is exceeded or fallen behind. Training - HRM HRM is set to notify users with alarm when the heart rate exceeds or falls behind a specific range of heart rates per minutes. The specific heart rate range is pre-determined in the Select Range page.
activate/deactivate the Cadence sensor. Go to Setting Wireless Link Activate ANT+ Devices Cadence. Cadence range can be selected from default list or can be defined by users. See illustration below. Select Cadence range from list: Define Cadence range by user: Training Time Users can set Training Time when they want to workout for certain period of time. Move the left/right button to set HH (hour) and MM (minute). Press the button to increase/decrease the value.
When the goal of training time is reached, a message prompts to show the training is to finish. When you select Start Training, a warning message prompts to notify you that current track logs will save and cleared. A new log will start. You can disable the message prompt by checking the box. Start Training The training page appears with HRM/Cadence/speed icon shown on the upper right. Press the left/right button to switch between page for speed, time, distance and grade information.
The icon of HRM/Cadence or Speed varies according to the status of the corresponding sensor. (i). The icon flashes and is displayed steadily to indicate the corresponding sensor is well connected; (ii). The icon freezes when the corresponding sensor signal is lost for a short period of time. (iii) . The icon disappears if the corresponding sensor signal is lost. If current HRM/Cadence or Speed exceeds or falls behind the user’s pre-setting range, the corresponding value will be highlighted for notification.
To view training summary in plot, press . After entering the plot mode, you can press the OK button to choose among modes of different combination, for example, HRM + Time, HRM + Distance, Cadence + Time or Cadence + Distance. The default mode is HRM+Time.
Multi Finder Mode. The Multiple Finder Mode shows the direction to the start of the track and leads you back to the starting point; alternatively, enter the coordinates for the destination to be guided by direction and distance. TripStart auto memorized your first GPS fixing location. This cannot be edited or changed by users.
Set Points Save current coordinates to a Finder point on the List. Show Displays the coordinates of current location and the destination.
Pedometer Mode. Pedometer mode enables users to count and record the number of steps taken, and the calories burned. Press the Power button to Start/Pause Pedometer. Press the OK button to enter the Option Menu. The icon appears to indicate the pedometer is starting. Main screen: The device will start counting the walking steps, time, distance, and calories burned. Press the OK button to Reset Counter or to set the Stride Length. Please note: 1.
Compass Mode.
Setting Mode. Setting Menu Quick Setup Quick setup allows you to select sport type, set user weight and select Odometer. Alert The Alert function can be set for time, speed, distance and altitude. Calibration Calibration is needed at the start of each activity’s log.
Log The Memory-Map Bike 270 Pro is set to automatically start logging user’s track once it is turned on. Users can also set the log interval by pre-determined time or distance. Wireless Link The Memory-Map Bike 270 Pro uses ANT+ wireless technology to connect with nearby ANT+ heart rate monitor straps, ANT+ bike cadence sensors and ANT+ bike speed sensors General The General Setting includes User Profile, Backlight, Auto Flip Page, Memory Mode and Auto Power.
History Mode. History shows track details including speed, time, distance, altitude, check points, calories consumed, and CO2 reduced. Displays total number of tracks. Tracks can also be set as Favorite. Track List displays all history track logs with track time and distance listed by order of time. Push the OK button to save the track to your favorite list. Favorite: Collect your favorite tracks in one place. Statistics: shows activity statistic for all tracks or favorites.
Track statistics. Use the left and right buttons to switch between different intervals (1, 2, 3, 4, 5, 6, 7, 10, 12 days, 2 weeks, 1 month, and all.
Getting Started. Turning On Memory-Map Bike 270 Pro. Press the Power button until the startup screen appears on the LCD. Turning Off Memory-Map Bike 270 Pro. Press the Power button for 3 seconds and you will be prompted a message to confirm the message. Press the OK button again. Initial Setup. Please perform the initial setup for the very first time use of Memory-Map Bike 270 Pro. If the Memory-Map Bike 270 Pro is reset, the Initial Setup will automatically start when users turn on the device.
Starting/Stopping Logging. Auto-Start Logging The Memory-Map Bike 270 Pro is set to automatically log your track once it is turned on. To pause logging during activity, just press the Power icon “ button and the icon “ ” will be replaced by pause ” as shown below. Users are able to use the Quick Menu function to start/pause the log. For more details on data log recording, please refer to the later section titled “ Log”.
Basic Operation. Quick Menu Press and concurrently, the quick menu appears for fast setup including: enter Main Menu, Save POI, Pause Log, Save & Clear (log), and QR Code, Lock Keys and Activate 2.4G. Save POI Save coordinates as POI (waypoint) Pause Log Pause track logging. Save & Clear Save the track and start another new log. QR Code Display current location in a QR code for mobile devices. Lock Keys Lock the buttons to avoid accidently touch. Press to unlock. Activate 2.
Basic Operation without Setting The Memory-Map Bike 270 Pro is designed to automatically log once it is on and GPS signal is received. Select Sport Mode from the main menu and the default first page Speed Meter appears. You are ready to use the basic function of this device. Main Menu Sport Mode Speed Meter Speed Meter See below for the description of Sport Information on the speed meter.
Status Icons. The status icons indicates Sport mode, Compass icon, POI, Backlight, Satellite Status, Memory Mode and Battery.
Setting Up Memory-Map Bike 270 Pro. Quick Setup. User-friendly Quick setup function allows you to quickly setup most common settings. Press the Menu button to enter Main Menu and choose Quick Setup to begin. Q1. Sport Mode appears. Sport Mode Use the Up/Down button to move to the desired sport mode. 1. Press the OK button to confirm and save. 2. Q2. Weight setup appears. 3. Press the Left/Right button to move among digits. 4. Press the Up/Down button to adjust the value. 5.
8. Press the OK button when finish. 9. Return to the main menu. Press the Power Key to start. Alert. The Alert function can be set for time, speed, distance and altitude. Time Alert - appears only when the pre-determined time is reached. Speed Alert - appears only when the pre-determined speed is reached. Distance Alert - appears only when the pre-determined distance is reached. Altitude Alert - appears only when the pre-determined altitude is reached.
To Set Time Alert i. Press the Left/Right button to move to left/right. ii. Press the Up/Down button to adjust the value. Press the OK button to confirm. iii. Press the Up/Down (Y) / (N) button to check Enable or leave it blank. iv. Press the OK button to confirm and return to the Alert Menu. Note: Time must be set within the range of 00:00:01 to 23:59:59. To Set Speed Alert i. Press the Left/Right button to move to left/right. ii. Press the Up/Down button to adjust the value.
To Set Altitude Alert i. Press the Left/Right button to move to left/right. ii. Press the Up/Down button to adjust the value. Press the OK button to confirm. iii. Press the Up/Down (Y) / (N) button to check Enable or leave it blank. iv. Press the OK button to confirm and return to the Alert Menu. Note: Altitude must be set within the range of 1 to 9999 (m). Reset Alert You may also reset alert by selecting Reset Alert from the Alert submenu: 1. Select Reset Alert. 2.
Altimeter Calibration A barometer is an instrument for determining the pressure generated by the weight of the atmosphere. Users can use their Bike 270 Pro to determine their immediate altitude and altitude gained/lost. Barometer calibration is set to be automatically performed by default. However, users can set the device to be manually calibrated. Note: If the device is set to Auto Calibration, the altitude will be gained from the following algorithm. 1.
Compass Calibration Main Menu Setting Calibration Compass Press the OK button to calibrate the compass. Step 1. Hold the compass level with the horizon. Make sure that you are not near any metallic or magnetic objects. Press the OK button. Step 2. Rotate the compass twice slowly (two complete rotations), make sure that the compass remains level to the horizon. Step 3. Press the OK button. Once calibration is finished, the following screen appears followed by a beep sound.
Log Interval The Memory-Map Bike 270 Pro is set to automatically log your track once it is turned on. The factory setting of automatic logging is set to log at interval of time/distance 10 m/5 sec. Bike 270 Pro checks the distance every 5 seconds. See below illustration for an example. If the distance is less than 10 meters in the first 5 seconds, the Memory-Map Bike 270 Pro is not logging. Bike 270 Pro checked again in another 5 seconds.
Note: Time interval must be set within the range of 1 to 120 seconds; Distance interval must be set within the range of 1 to 1000 (m). Auto-Start (Logging) Auto-Start means the Memory-Map Bike 270 Pro will automatically start to log once the satellite signal is well received. User can enable/disable the auto logging by entering Setting Log Auto Start Yes/No Pause (Logging) Users can set the log to stop/pause recording when the speed is below a determined number from 1km to 5 km.
Wireless Link. The Memory-Map Bike 270 Pro is using ANT+ wireless technology to collect and transfer sensor data. The three sport sensors supported are ANT+ heart rate monitor straps, ANT+ bike cadences sensors and ANT+ bike speed sensors Press the OK button to enter the setting menu. Activate Wireless Link Users have to activate the Memory-Map Bike 270 Pro wireless link before they connect the Memory-Map Bike 270 Pro with sport sensors.
The device will start scanning devices nearby. When completed, scanned devices are listed. Connect and Detect Move the Up/Down arrow to select the sensor to connect. A warning message prompts to remind users to make sure the selected sensor is properly installed, for example, HRM should be well-strapped to your chest so that the Memory-Map Bike 270 Pro can detect without failure. Or the message of “Device Not Detected” appears.
About Wheel Size The Memory-Map Bike 270 Pro comes with a speed sensor that reads the speed of your bike wheel rotation. Distance between two points during your workout is thus measured if your bike wheel size is also properly entered. Compared with GPS distance, distance calculated by speed meter is more accurate for GPS distance is likely to have GPS signal lost or other problem. In order to acquire more accurate distance, accurate wheel size of your bike needs to be entered.
Measuring Circumference If your wheel size is not listed on the Memory-Map Bike 270 Pro for selection, you can go to User Define to manually enter your circumference. To measure your circumference, choose Method A or B and follow the steps described and illustrated below. Or you can consult your bike dealer for information of the bike circumference. Method A: You can calculate the circumference of your bike by simple math as following formula. Step 1. Measure the diameter.
General (Setting). User Profile Users profile includes User’s age (Birth year), Weight and Height. Once the above information is entered, user’s BMI (Body Mass Index) value is determined. Refer to the following table for BMI categories. Body mass index by category Category BMI Underweight Below 18.5 Normal 18.5 – 24.9 Overweight 25.0 – 29.9 Obesity 30.0 or greater Set Backlight Backlight can be set to Always on if needed.
Auto Flip Page Users can enable the Auto Flip Page to rotate all sport information pages regularly by 5, 10, 30 or 60 seconds. Or they can choose to manually flip the Sport Page. Memory Mode As a data logger, the Memory-Map Bike 270 Pro is designed to automatically collect information upon activation, and can be left unattended for the duration of the monitoring period, the internal memory will be used up by recorded information.
System Setting. Delete all log Select “Delete all log” will empty the internal memory and all recorded log data will be removed. Time Format System Time Format Select format “24 hours” and “12 hours”. Time Zone System Time Zone Press the up and down button to select.
Unit Unit Conversion converts units of Speed/Distance, Weight and Temperature. Speed/Distance System Unit Speed/Distance Select “Distance/Speed” to choose metric as “km/m/kmh”, imperial as “mi/ft/mph” or nautical as “kt/nm”. Weight System Unit Weight Select “weight” to choose metric as “Kilogram/kg”, or imperial as “Pound/lb”.
LCD Contrast LCD contrast can be adjusted in the LCD Contrast. Press the Up/Down button to select. Odometer You can save trip information in Odometer A or Odometer B. The default is Odometer A. The value of both odometers can be reset or modified. Press the left and right button to move among the number. Press up and down button to increase/decrease the value. When finished, press OK button to continue. Press the up and down button to tick the Enable box.
Cold Start Setting GPS Cold Start Users are recommended to perform Cold Start when they travel for a long distance within a short period of time, say flying from Asia to Europe, for the GPS receiver may have problem to receive information about the current time, the orbits of the satellites or its own current position with previous GPS acquired. The searching time will be long for it proceeds to listen for satellites at random until it has acquired one or more.
About ezPlanner Plus and ezPlanner. Functions of ezPlanner. Plan route at home with an easy to use tool Edit the route directly on the Google map Able to plan the route between two points or follow the road User define Placemark to plan the rest point at home Automatically show earth elevation as soon as the route is completed! Able to synchronize the route to Memory-Map Bike 270 Pro Import/Export .gpx .
Normal Care and Maintenance. To ensure the unit’s normal operation and extended life span, please note the following while using and storing: Do not drop the unit If violently impacted or shocked, serious damage may be caused. Avoid sudden temperature changes Condensation may occur when entering a warm room on a cold day. To prevent condensation from damaging the unit, please place into an airtight plastic bag before sudden temperature changes.
Specifications. GPS Chip Chipset: MTK 3329 Dimensions 81.7x 54x 22 mm Weight 84g Battery Rechargeable 1050 mAh lithium battery Power DC5V/1A Button 2 buttons : Menu / Power + 5 Direction keys Antenna Built-in patch antenna IO Interface Mini USB Display High-contrast electro-luminescent backlit display, 4-level grayscale LCD. Dimensions : 33.5 × 33.5 mm, 1.
Service under Warranty. Your device comes with a standard one year manufacturer’s warranty. For help and support please visit snooperneo.co.uk or call 0333 240 1000.
