User's Manual

14
snom m9 Quick Start Guide
E
N
G
L
I
S
H
installation
Before first use, the handset battery should be charged
fully. This will take approximately 8 hours.
preparation of handset
1. Lift off the battery cover.
2. Insert the battery pack with the electrodes in the top left corner.
Replace the cover.
3. Connect the 5.9 V power supply of the charger to the wall outlet
first, then to the charger, and place the handset in the charger.
3.1. 2.
snom
rechargeable
Lithium-Ion
battery
Base station
Power LED
– lit when on
Call LED
– flashes during firmware update
– lit when call in progress
– blinks slowly when waiting for
handset registrations
Registration LED
– lit when the base
station is registered
Network LED
– flashes during boot,
indicating that the base
station has received an IP
address
qsg_m9_113.indd 14 02.11.2011 09:59:05