Instructions / Assembly

13
AUGER AND CHUTE
Model 920304, 305, 306, 309, 310, 402, 403
Item Part No. Qty. Description
1 06529700 2 Nut, Locking Center .25-20
2 52000900 1 Chute, Discharge w/Cap and Decal
3 06200007 1 Bolt, Round Head Square Short Neck .31-18 x 1.00 Grade 5
4 00170200 1 Device, Snow Cleanout
5 06800028 2 Rivet, Pop .187
6 00170300 1 Mount, Snow Cleanout
7 52002600 1 Housing, 22" Sno-Tek w/Decal (920304, 310)
52001100 1 Housing, 24" Sno Tek w/Decal (920305, 309, 402)
52002200 1 Housing, 26" Sno Tek w/Decal (920306)
52002400 1 Housing, 28" Sno-Tek w/Decal (492003)
8 07400034 6 Screw, Tapping Hex Washer Head .25-20 x .50
9 02483851 2 Runner, Double Flange
10 06529600 4 Nut, Locking Center .38-16
11 06435700 4 Washer, Flat Steel .38 x .875 x .083
12 05500918 2 Bushing, Rake Shaft
13 53212300 1 Rake, Right Hand 20” with Zerk (Includes Item 15) (920304, 310)
53213100 1 Rake, Right Hand 24” with Zerk (Includes Item 15) (920305, 306, 309, 402)
52003100 1 Rake, Right Hand 28" with Zerk (Includes item 15) (920403)
53212400 1 Rake, Left Hand 20" with Zerk (includes item 15) (920304)
53213200 1 Rake, Left Hand 24” with Zerk (Includes Item 15) (920305, 306, 309, 402)
52003200 1 Rake, Left Hand 28" with Zerk (Includes item 15) (920403)
14 53200500 2 Shear Bolt with Nut (Includes Items 1)
15 07061300 2 Zerk, Fitting .25 x .125 Drive-In
16 07411500 4 Screw, Tapping Hex Washer Head .31-18 x .50
17 06437200 1 Washer, Flat Steel .344 x .688 x .065
18 07500105 1 Wing Knob .31-18
19 06433600 1 Washer, Flat Nylon .375 x .75 x .060
20 06200120 5 Bolt, Round Short Head Square Short Neck .31-18 x .62
21 03884351 1 Scraper Blade 22” (920304, 310)
03884451 1 Scraper Blade 24" (920305, 309, 402)
03884551 1 Scraper Blade 26” (920306)
04145451 1 Scraper Blade 28" (920403)
22 06200004 4 Bolt, Round Head Square Short Neck .38-16 x .75
23 06543100 5 Nut, Locking Top Flange .31-18
24 05500917 2 Bushing, Sleeve (920304, 306, 310)